Starting from June 21, 2021, the PCT marking for products subject to GOST R declarations and certificates is replaced by
a new sign, the Circulation Mark:
Products, the conformity of which was confirmed before June 21, 2021, can be released into circulation up until the end of
the conformity assessment documents, but no later than June 20, 2022. Re-labeling of such products already marked with
the PCT mark is not required during this period.
Products, certified after June 21, 2021, new marking is mandatory.
Rules of marking with a Circulation Mark
Marking with the Circulation Mark is carried out by the manufacturer of the product or the applicant independently in any
way convenient for them prior to the release of the product into circulation.
The Circulation Mark is applied to the non-removable part of each product unit and (or) its packaging (if any) and (or) is
indicated in the accompanying documentation (if any). When applied to the accompanying documentation, the Circulation
Mark is applied on an empty field, in the place where information on the mandatory confirmation of product conformity is
given.
The place of application of the Circulation Mark on products, packaging and accompanying documentation is determined
by the manufacturer of the product or the applicant.
If it is impossible to apply the Circulation Mark directly to the product, it is applied to the label (tag) or tape attached to the
product.
If it is impossible to apply the Circulation Mark directly to the packaging, it is applied on an insert sheet attached to
individual or group consumer packaging.
Marking with the Circulation Mark is carried out by technological methods, which must ensure:
1. invariability of consumer properties of products;
2. a clear image of the Circulation Mark;
3. endurance of the Circulation Mark image to external influencing factors;
4. preservation of the Circulation Mark image during the established service life or shelf life of the product.
The execution of the Circulation Mark must be one-color and contrast with the color of the surface on which it is applied.
The Circulation Mark can be flat, embossed or holographic.
The size of the Circulation Mark should not create difficulties for consumers to identify it and have a width of at least 5 mm.
If, in addition to the Circulation Mark, products are marked with other conformity marks, including the marks of conformity
of voluntary product certification systems, then such markings should not impair the visibility, clarity and readability of the
Circulation Mark.
Products, the conformity of which is not confirmed in the manner prescribed by Article 46 of the Federal Law of December
27, 2002 No. 184-FZ "On Technical Regulation", are not marked with the Circulation Mark.
In the case of marking with the Circulation Mark of products, the compliance of which has not been confirmed in prescribed
order, administrative liability is applicable.
Regulatory references:
1. Federal Law 460-FZ dated December 22, 2020.
2. Draft of Decree “On approval of the procedure for labeling products, the compliance of which has been confirmed in
the manner prescribed by Article 46 of the Federal Law of December 27, 2002 No. 184-FZ "On Technical Regulation"
自 2021 年 6 月 21 日起，受 GOST R 声明和证书约束的产品的 PCT 标志由一个新的标志，流通标志：2021 年 6 月 21 日前确认符合性的产品，可放行至 2021 年底合格评定文件，但不迟于 2022 年 6 月 20 日。
在此期间不需要 PCT 标志。2021 年 6 月 21 日之后获得认证的产品，新标志是强制性的。
使用流通标志进行标记的规则
流通标志的标记是由产品的制造商或申请人在任何情况下独立进行的。
在产品进入流通之前方便他们的方式。
流通标志应用于每个产品单元的不可拆卸部分和（或）其包装（如果有）和（或）随附文件（如果有）中指明。当应用于随附文件时，Circulation标志应用在空白区域，在产品符合性强制性确认信息所在的地方给。确定流通标志在产品、包装和随附文件上的应用位置由产品的制造商或申请人。如果无法将流通标志直接贴在产品上，则将其贴在贴在产品上的标签（吊牌）或胶带上。
产品。如果无法将流通标志直接贴在包装上，则将其贴在随附的插页上个人或团体消费包装。
使用流通标志进行标记是通过技术方法进行的，必须确保：
1. 产品消费特性的不变性；
2. 流通标志清晰的图像；
3. Circulation Mark 图像对外部影响因素的耐受性；
4. 在产品的既定使用寿命或保质期内保留流通标志图像。循环标志的执行必须是一种颜色，并与应用表面的颜色形成对比。循环标记可以是平面的、浮雕的或全息的。流通标志的尺寸不应给消费者造成识别困难，且宽度至少为 5 毫米。如果除流通标志外，产品还标有其他符合性标志，包括符合性标志自愿性产品认证系统，则此类标记不应损害产品的可见性、清晰度和可读性
流通标志。未按照 12 月联邦法第 46 条规定的方式确认符合性的产品27、2002年第184-FZ号《技术规范》，未标注流通标志。
未按规定确认符合性的产品加注流通标志的情况订单，适用行政责任。
监管参考：
1. 2020 年 12 月 22 日联邦法律 460-FZ。
2.《关于批准产品标识程序的法令草案》
2002 年 12 月 27 日第 184-FZ 号“关于技术法规”的联邦法第 46 条规定的方式
電話：+86 20-29037236
郵箱：cucertificate@centraluniversal.net 
skype：centraluniversal
地址：中國廣州花都區美東產業園A棟
联系我们 
在线客服 